Solar kit 810Wp 230V self-consumption microinverter IQ8+ ENPHASE

Self-consumption kit 810Wp IQ8+ Enphase:

Install your solar kit with ease thanks to our Plug and Play solution.

TW405MAP 405W solar panel:

Committed to the research and development of solar energy products; TW is a modern company with many years of experience, with a high degree of technological advancement in the production of silicon cells with controlled workmanship used to build photovoltaic panels sold worldwide.

The TW Solar 405 W module has been designed using Multi-busbar technology, and Half-cut technology, which reduces power loss, giving an additional output gain of between 5 and 10 W. A complementary solution has also been used to increase the module's efficiency, namely High Density Encapsulation, to achieve a gain of 0.15%. Compared with typical PV modules in the same class, TW Solar is unrivalled.

TW Solar 405 W is constructed from 108 monocrystalline photovoltaic cells (PERC) set in a corrosion-resistant anodised lightweight aluminium alloy frame and covered with a 3.2 mm thick panel of high light transmission glass. The glass has an anti-reflective (AR) coating and is thermally fortified. All this is in addition to a 15-year product warranty and a 25-year solar warranty.

Specifications:

• 25-year power output guarantee
• Use of Multi-busbar technology
• High, stable efficiency of up to 20.7% thanks to cutting-edge technology
• Positive power tolerance up to +5W
• Excellent performance even in low sunlight conditions
• Half-cut technology to increase output power
• High mechanical strength
• Low PID sensitivity thanks to quality assurance
• Unique cell design means lower PV module temperature and higher efficiency
• Snow load up to 5400 Pa and wind load up to 2400 Pa
• No mechanical damage during cell production - loss-free laser cutting
• Dimensions 172.2 x 113.4 x 30 cm
• Weight: 21kg

Microinverter Enphase IQ8PLUS - Generates power even in the event of a power cut:

Enphase IQ8 high-power, smart grid-ready microinverters are designed to fit the latest generation of high-efficiency photovoltaic modules. The IQ8 has the highest energy production and reliability standards in the industry and, with Rapid Shutdown functionality, meets the highest safety standards. The brain of the solid-state microinverter is our proprietary application-specific integrated circuit (ASIC), which allows the microinverter to operate in grid-connected or off-grid mode.

Compatible with the latest generation of high-efficiency PV modules

- Supports the latest higher current PV modules using M10 wafers
- Compatible with all current PV module wattages and cell architectures
- Future-proof design with the ability to form a microgrid in combination with the IQ System Controller (to be launched shortly)

Easy to install and commission

- Lightweight and compact with integrated MC4 connectors for easy installation
- Quick installation with simple AC wiring
- New integrated circuit technology enables faster firmware upgrades

High power output, reliability and safety

- Over one million hours of live reliability testing
- Patented Burst Mode technology delivers increased power output
- Low voltage DC and Rapid Shutdown for ultimate fire safety

Technical data:

Maximum output power: 300 VA
Maximum continuous output power: 290 VA
Operating range: 16 - 49 V
Length: 212 mm
Width: 176 mm
Height: 30.2 mm
Weight: 1.1 kg

Cabling kit Enphase plug and play :

• 1 Q-Cable AC 2G2.5 Enphase portrait
• 1 male connector + 1 female connector Enphase IQ
• 1 End termination - Single phase - Q cable - IQ - Enphase ®
• 1 IQ microinverter disconnection tool - Enphase ®