Trina Solar Vertex S PERC 420 Wp All Black

211 Wp/m² | 1762 x 1134 x 30 mm | 21.0% efficiency | 144 cells | MC4-Evo 2

The Trina TSM-420DE09R.08 in the Vertex S series is a robust module offering 420 Wp (211 Wp/m²) at 21% efficiency. It has 144 monofacial cells for a total module size of 1762 x 1134 x 30 mm, 3.2 mm glass (front side) and weighs 21.8 kg. It is covered by a robust 15-year product warranty and a 25-year extended performance warranty. Bulk orders for the Trina Vertex S 420 Wp are available in batches of 36 units per pallet or 936 pieces per container.

Trina Vertex S Series Solar Module

The extremely solid construction of the Vertex S is appreciated by both end-users and installers. The ultra-thin busbars and uniformly coloured panels offer an attractive appearance whatever the size of the installation. Vertex S modules are compatible with all common inverters, optimisers and mounting systems. Combined with industry standard sizes and low weight, it's no wonder these modules are a favourite for residential and commercial projects large and small.

All Black Solar Module

An all-black solar panel means it has a uniformly black appearance across its entire surface: cells, frame and back sheet. There is no significant difference in performance compared to blue or black/white modules, but many consider the all-black design to be more visually appealing.

Enphase IQ8+ Micro Inverter

Enphase Q Cable Single Phase Portrait

Single-phase | 2.5 mm² | Module slot 1m

The IQ Cable Q-25-10-240 is a lightweight distributed generation cable with pre-installed connectors for IQ microinverters that enables faster, simpler and more reliable installations. It is designed for portrait-facing photovoltaic modules and has a 1.3-metre spacing between connectors.

HACF-1-1-32A-30mA-SPD2 AC box

HISBOX Single-phase residential AC enclosure 32A

Single-phase AC enclosures are designed to suit inverters with a rated output of up to 6.4kVA. They comprise an earth leakage circuit breaker (ELCB) and a circuit breaker (CB) for protection of the network, as well as a Citel AC surge arrester and a CB for protection of the AC part of the installation

Enphase Disconnection key for Q cable connectors

Enphase Q-DISC-10

The Q-DISC-10 disconnection tool is designed for Q Cable connectors, DC connectors and AC module assemblies. This reliable tool simplifies maintenance and installations.

Enphase accessories are part of the sixth-generation Enphase IQ system. These products offer simplicity, reliability and shorter installation times.

Enphase End cap for Q cable

The Enphase accessories allow you to fine-tune the photovoltaic installation with microinverters. For example, there are mounting clamps to secure the installation, tools to disconnect the connectors and sealing caps for the installation can be found.

Some USPs for microinverters Enphase:

Accessories for the ideal PV installation.
Easy installation with lightweight two-wire cable.

TOXFREE ZH Outdoor H07Z1-K (AS) Cu/Sn 6 mm² 500 m

Advantages of the earthing cable: - UV-resistant - Flexible tinned conductor - Halogen-free - CE marked For earthing PV systems.

SOLAR CABLE HIKRA GROUND 4MM2 RED 100M 1500V

ClickFit EVO Universal module clamp grey (1008020)

The ClickFit EVO grey universal module clamp is made from high-quality steel with a special "Magnelis" coating for optimum corrosion resistance. The module clamp is supplied assembled as standard and is suitable for all framed solar panels between 30 and 50 mm thick. Thanks to its clever design, it can be used as an intermediate clamp and, in combination with the end cap, as an end clamp. The design also makes it possible to equalise the potential between solar panels. The universal module clamp penetrates the anodised layer of the solar panel and interconnects the solar panels when the system needs to be earthed. The clamps are fitted with anti-theft screws as standard and are available in black and grey.